12 Dec 2018 The foregoing test procedure is comparable to UL 723, building materials is applicable to exposed surfaces such as walls, ceilings and others. Flame spread and smoke developed index are reported. In order to obtain the Flame Spread Classification, the above results should be compared to the.

Characteristics of Building Materials, or ANSI/UL 723, Standard for Test for Surface Burning Characteristics of Building Materials, shall be classified as follows in accordance with their flame spread index and smoke developed index, except as indicated in 10.2.3.4(4): UL Classified (BZJZ) glass fiber or mineral wool insulation, min. 3-1/2 in. thick, may be used in place of 1/2 in. (12.7 mm) thick gypsum board, and placed to completely fill the wood or steel stud cavities. Examples of other building materials fire performance as listed on www.ul.com and classified according to NFPA 101 criteria: MATERIAL FSI SDI CLASSIFICATION Mineral board(3) 0 0 Class I (Class A) Mineral and fiber boards (coated)(4) 20 30 Class I (Class A) Mineral and fiber boards (uncoated)(5) 285–305 65 Not Ratable ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL. 1.7 Tests for burning characteristics of building materials, based on the rate of flame spread, can be found in the Standard for Test for Surface Burning Characteristics of Building Materials, UL 723. Code authorities count on UL’s technical expertise to provide certification services, cutting edge research, and the technical support needed to provide code compliant installations. Certifications Information that identifies manufacturer’s UL Certified products and systems and the applications for which they have been investigated. Noncombustible – As applied to building construction material, means a material that, in the form in which it is used, is either one of the following: Materials of which no part will ignite and burn when subjected to fire. Any material conforming to ASTM Standard E 136 shall be considered noncombustible within the meaning of this section.

Characteristics of Building Materials, or ANSI/UL 723, Standard for Test for Surface Burning Characteristics of Building Materials, shall be classified as follows in accordance with their flame spread index and smoke developed index, except as indicated in 10.2.3.4(4):

1. 2006 International Building Code a. Section 803 Wall and Ceiling Finishes, Paragraph 803.1 General states, “Interior wall and ceiling finishes shall be classified in accordance with ASTM E- 84.Such interior finish materials shall be grouped in the following classes in accordance with their flame spread and smoke-developed indexes. i. UL 94 Flame Classifications (UL94 FLAME RATINGS) UL, 94 V-0, V-1, HB, 5V Underwriters Laboratory ratings for plastic materials. Order Plastic Sheets, Rods, Tubing and Films from Professional Plastics website. Characteristics of Building Materials, or ANSI/UL 723, Standard for Test for Surface Burning Characteristics of Building Materials, shall be classified as follows in accordance with their flame spread index and smoke developed index, except as indicated in 10.2.3.4(4): UL Classified (BZJZ) glass fiber or mineral wool insulation, min. 3-1/2 in. thick, may be used in place of 1/2 in. (12.7 mm) thick gypsum board, and placed to completely fill the wood or steel stud cavities. Examples of other building materials fire performance as listed on www.ul.com and classified according to NFPA 101 criteria: MATERIAL FSI SDI CLASSIFICATION Mineral board(3) 0 0 Class I (Class A) Mineral and fiber boards (coated)(4) 20 30 Class I (Class A) Mineral and fiber boards (uncoated)(5) 285–305 65 Not Ratable ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.

3 Feb 2020 UL has created multi-attribute sustainability standards for the following industries: building materials/finished, janitorial/sanitation, household 

Materials are classified and recognized in accordance with section 28-113 of the Administrative Code and the OTCR Rule. Code-prescribed. Materials referenced   3 Feb 2020 UL has created multi-attribute sustainability standards for the following industries: building materials/finished, janitorial/sanitation, household  Interior wall and ceiling finish materials shall be classified for fire performance shall have a Class A flame spread index in accordance with ASTM E84 or UL  Buildings classified as a Group U Agricultural Building, as defined in Section 202 of for ignition-resistant material tested in accordance with ASTM E84 or UL 723 The material shall exhibit a flame spread index not exceeding 25 and shall  27 Mar 2018 The standard for Reaction-to-Fire classification of buildings. products is EN Class B in EN 13501-1 represents materials that do not give flashover in the reference. room test more than 75 and a smoke-developed index of not more than 450 where tested in the accordance with ASTM E 108 or UL 790. Duraflake FR particleboard is a UL® approved, Class 1- rated fire retardant panel , which Class 1 Flame Spread. See UL Classified Building Materials Index. ASTM E119: Fire Tests of Building Materials: Hourly Ratings are assigned only FR-S Rating: UL FR-S classified properties have a flame spread index of 25 or 

Characteristics of Building Materials. These tapes are considered “Classified” via UL 723, and earn a rating for flame spread and smoke developed. The push for 

1 Jun 2019 EN 13501 Fire classification and EN 13238 standard substrates. 34. 3.1.5 applicable for building materials. Focus is put first required such as NFPA 286 and UL 1715. ISO 1182, DIN 4102 and oxygen index are used. Explore variations of the UL Mark and their significance around the globe. more. Designing and Ordering. Find out how to design and order UL Listing and Classification Marks. more. Promotion and Advertising Guidelines. Show the UL Mark: benefits and guidelines for customers. UL Classified Mark - Appears on representative samples of products that UL has evaluated by only with respect to specific properties, a limited range of hazards, or suitability for use under limited or special conditions. Typically, products Classified by UL fall into the general categories of building materials and industrial equipment. Building Performance. Leverage our expertise in the interactions between materials, products and systems used in construction and operations to understand the impact on a structure, its anticipated uses, the surrounding and interior environments and building occupants.

Duraflake FR particleboard is a UL® approved, Class 1- rated fire retardant panel , which Class 1 Flame Spread. See UL Classified Building Materials Index.

Flame Spread Index and Smoke Developed Index. This document provides results from an materials classified as Interior Wall and Ceiling Finishes in building materials. Material Type ASTM E-84 / UL 723 Guide Lines. Class A Fire Rating  ASTM E 84. Standard test method for surface burning characteristics of of building materials. The flame spread Index and Smoke Developed Index values obtained by the ASTM E 84 They do not preclude a material being otherwise classified by the authority of based on test results from NFPA 255, ASTM E-84, or UL 723.” Underwriters Laboratories Inc. (UL) is a non-profit, privately owned and operated Illinois, UL develops standards and test procedures for products, materials, Other products may be “UL Classified” for specific hazards or properties. Local jurisdictional authorities, such as building, electrical and fire inspectors, may be  12 Dec 2018 The foregoing test procedure is comparable to UL 723, building materials is applicable to exposed surfaces such as walls, ceilings and others. Flame spread and smoke developed index are reported. In order to obtain the Flame Spread Classification, the above results should be compared to the. in the Electrical Construction Material Directory for names of manufacturers. A the UL Classification Marking with a Flame Spread Index of 25 or less and a.

Additionally, the National Fire Protection Agency (NFPA) 101® Life Safety Code® requires that “Interior wall or ceiling finish that is required elsewhere in this Code to be Class A, Class B, or Class C shall be classified based on test results from NFPA 255, ASTM E-84, or UL 723.” UL 746F, Polymeric Materials: Flexible Dielectric Film Materials for Use in Printed-Wiring Boards and Flexible Materials Interconnect Constructions; Standards for Wire and Cable. UL 62, Flexible Cords and Cables; UL 758, Appliance Wiring Material (AWM) UL 817, Cord Sets and Power Supply Cords; UL 2556, Wire and Cable Test Methods; Standards for Canada developed by ULC Standards, a member of the UL family of companies. CAN/ULC-S101-07, Standard Methods for Fire Endurance Tests of Building 1. 2006 International Building Code a. Section 803 Wall and Ceiling Finishes, Paragraph 803.1 General states, “Interior wall and ceiling finishes shall be classified in accordance with ASTM E- 84.Such interior finish materials shall be grouped in the following classes in accordance with their flame spread and smoke-developed indexes. i.